Showing posts with label diamond stud. Show all posts
Showing posts with label diamond stud. Show all posts

Sunday, March 13, 2011

Sweater Purse 4.0

This is my fourth installment of the Sweater Purse.  For those of you that have not read a Sweater Purse post yet, I took regular wool sweaters and washed them in hot, soapy water until they shrank.  This created an impermeable fabric that can be cut without fraying.  The technique is called felting.  It seems like I have made a hundred of them, but I think I have made only about eight (8) of them so far.  Each one takes on a character all their own.  See Sweater Purse 1.0 to see how I did the actual felting.

This purse will be made from a sleeve from a gray J. Crew sweater.  I know, it seems like a sin to cut up a J. Crew sweater, but you make whatever sacrifices are needed to get the job done!  I think I got this sweater at a thrift store in Tampa for about $1, so I don't feel so bad cutting it up.

Cut off sleeve - one purse coming up!

So, for this purse, I will use a sleeve, my chic lining, a ring I took off an old purse and a purple zipper.  I did not use the entire sleeve, just a portion of it.  My chic lining is lining that I got at a yard sale for cheap and I'm using it on everything.  The ring I got from a purse that I tore apart for the hardware, see Chunky Cuff Bangles post, and finally a purple zipper that I had in my craft stash.

Rotary cut the sweater

I will use the left portion of the sleeve that you see in the above pic.  I also will use one of the little strips for something that is coming up.  The rest went back into the sweater scraps bag.

I squared-up the sleeve part but left it sewn as it was.  I turned it inside-out and sewed the bottom closed.

Sweater and lining

Then I measured the sweater part and sewed a matching lining section.  I turned the sweater back so the right side was out and then turned the lining inside-out and fitted it into the sweater.  I then used a zig-zag stitch to attach the lining to the sweater.  I then hand stitched a stitch in each corner from the inside of the purse to anchor the lining inside the purse; to keep it in place.

The lining is in!

I figured I would adorn this purse with a zipper rosette.  Using zippers for fashion and not for zipping has been in trend lately so I wanted to try something with it.  I went searching online and came across a tutorial on the zipper rosette.  There are several blogs out there dedicated to crafting, so I chose to make mine look like the one from Scraps to Beauty by Zandra.  My zipper was not that long so I took it apart and sewed the two parts to form one long zipper half.  (Technically one whole zipper could make two zipper rosettes).

This is where my little sweater strip comes into play.  By following Zandra's tutorial, it actually started looking like a rosette!

Stitch each step

I had a brain freeze a few times trying to ensure that the zipper teeth were facing the right way.  But, I ended up finishing it up so it looked nice.

How cute!!  Thanks Zandra!

Now, the large ring is going to be the handle on my purse.  I folded over the front edge to cover a portion of the ring and pinned it down.  I hand sewn the flap down.  This sounded easier than it was, trust me!

Ring, ring...who's there?

Once I attached the flap over the ring, I needed to figure out how to close this purse.  As it currently was, it was flapping wide open.  I ended up using a large eye-hook.  At first I put it on backwards, so I unstitched it then did it right.  I then trimmed the gray sweater strip that held my rosette and hand stitched the rosette onto the front of the purse.

Completed sweater purse

The closure on this purse may need to be reconsidered.  I was sober and was having a hard time latching it, so if I was inebriated in anyway, there is no way this was closing.  I will work on that with my friend to see what she wants to do.  She sews too, so she may have already fixed it.

Modeling the purse

Here is a pic of the sweater purse being modeled at the birthday/housewarming party.  This is also the party where I wore my diamond studded Chunky Cuff Bracelet that got some attention (I'm the one in green).  I cheated on my no-booze diet and had a few appletinis to celebrate.  We had a blast!!

Sunday, February 13, 2011

Chunky Cuff Bangles

I made these bracelets hoping it would be simple and quick, and it was!  I'm so glad when a project works out the way I anticipate it would.  Vince helped me with this project; I think he wanted to play with the hot glue gun.

First, this project idea came from a book called P.S. I Made This.  I bought this book at Books-A-Million and it is a great DIY book for the fashionista on a budget.  The link above is to the website for this book and it has a photo gallery and several DIY ideas right on the main page.  If you're a DIY gal, then you must check it out!

Ideas-a-plenty in this book!

I'm not claiming to be a fashionista, because I won't make half the ideas in this book, but the other half are quite clever.  Like I said, these bangles are from this book. 

The items needed for this project are a cardboard mailing tube, a knife to cut the tube, fabric strips (anything will do), scissors, and a hot glue gun.  I also had some cool studded strips that I harvested from a purse that I bought at Goodwill for $2 or $3.  It had some great hardware and a handle in great condition, so I bought it, with the intention of cutting it up.

Look at all the cool stuff on this purse!

First, the large rings are awesome, along with the handle, the small rings, the studded strips and the zipper pull all were taken off this purse.

All the possibilities!

Anyway, after I cut up this poor purse, I worked on unstitching the studded strips from the zippers.  I kept the fabric too; Vince will use these scraps later.  The other items I put aside and will use them on future projects.  I then cut about a 1 to 1.5" inch "slice" of cardboard tube for the bracelet base.

Cut on the edge of something so you don't gouge your work surface

I used a mailing tube that a calendar from work came in, so I did not even have to buy the tube (I love free stuff) and a bread knife.  I thought the serrated edge would work best, like a saw, but since I did not have a saw, this knife was my next best thing.

Then you take that slice and cut it so there is an opening, like for a cuff bracelet.  Pick the kind of fabric you want to use and cut it into at least a 1" wide strip that is at least a yard long.  I had some black lace from a past Halloween costume, so I cut from that.  But you can use anything, but if it is silky, it could fray.  That could be nice or not nice, depending on the look you are going for.  Thin fabrics would work the best.

Once you make one, you will want more!

Next, I practiced first, without gluing to get a feeling of how tight I was going to have to wrap.  This also gave me the feel of how much overlap I needed to do.  I did not want to see the cardboard under the lace, so I wrapped the lace overlapping itself at 1/4" intervals.  So, this is why you need a long strip of fabric.  If the fabric you choose is not lace or transparent, then you can be less tight/together with it.

Practice wrapping before you glue

Once I got the wrapping down,  I unwrapped it and took the cardboard opening and put a dab of glue on the inside of the cuff.  While hot, I affixed the end of the lace on the glue.  Then, as I practiced earlier, I wrapped the lace around the cuff.  As I got to the other end, I dabbed more glue and pressed the lace into it.  That is all you have to do!

Purse fabric cuff

Once the first one was completed, the others were simple.  Like I mentioned earlier, I glued the studded strip to one, Vince did another one with the other strip.  I did one with a ribbon and Vince did one with the leftover fabric from the purse.  We even made one with a feather on it.

Strike while the glue gun is hot!
 
We were looking around the house at what else we could wrap around a cardboard cuff!  We made several that evening and gave some to his daughter for her birthday and I plan on sending some up to my sister to give to her 80's-loving neighbor.

We had to stop ourselves, it was so fun!

These are very reminiscent of the Madonna Like a Virgin era. 

I'll always love Madonna!

You know, seeing this picture, you see that this sort of layering/lace/fingerless gloves/long necklaces are making a come back.  Not sure if the black rubber bracelets are coming back, but lots of other 80's inspired fashion is absolutely coming back.  I just hope that the pegging of jeans stays in the past.  I'm avoiding the skinny leg jeans and Converse sneakers.  I'm in my 30's, so I really have no business wearing those anyway!

I went to a party last night and got several compliments on my diamond studded lace cuff!  I was very excited to state that I made it with a cardboard tube!  It was worth doing.

I still have about two feet of cardboard tubing left, so this won't be the last time you see the Chunky Cuff Bangle!  (Hmm, what else can I glue to that cuff....)