T-Shirt Tanks

Happy 4th of July!

I know that the official day of summer already occurred, but the 4th always licks off the summer with a bang!

I have been sitting on this project for a few months.  I promised to work on this for a friend and kept putting it off.  But now, no more excuses!  I have completed this project and think that it was a quick and simple project.

My friend got this idea from Pintrest and I found the source of the project.  It started off as a no sew t-shirt tank project, but I only use fusible webbing for when I'm in a pinch or when a needle is not the most practical way to go.  My machine will make it more durable, so that is what I did.

The project is from the blog Crafter Hours and it is how to make a t-shirt into a tied tank top.

First you take a t-shirt you don't mind cutting up.  But pick one that you would wear to the beach, the pool, hanging around the house or running errands on the weekend.

Cut the neck off straight, then the sleeves and a few strips from the bottom.  I threw away the very bottom edge that has the hemming.  Cut 2 more strips from the bottom.

Then seam  the top cut edges where the neck is big enough to form a casing for the tying strips.

Snip the strips so they are long and thin, not a circle.  Then thread the strips, one in the front and one in the back.  Bunch the fabric up a bit and tie on the shoulders with the strips.  Trim away any excess striping material once you have the ties at a good length.

I left two out of the three shirts I did with the cut raw edge at the bottom.  Once that is done, then you are done!!

Another one:

And one more:

This one I also put a casing at the bottom and threaded another strip so that it can cinch on the side.  This t-shirt was a men's XXL, so I had to take it in at the sides.  I had plenty of room at the bottom to do the cinching.

There you go, go forth and cut up all of your husband's t-shirts so that you can have some chic beach shirts and all-round comfy tees.

Dishtowel Aprons

I made my first set of dishtowel aprons back in the early 2000's with a little help from Martha Stewart.  I subscribed to Living back then and got the idea from that.

This project is going to be a birthday gift for a friend and I made a matching one for her daughter.

You will need only a few items:

• Dishtowel, any size
• Twill tape (any width, I used 3/4" wide)
• This is bought at Joann's in the zipper section
• Scissors
• Needle & thread

First, I went shopping for some cute dish towels.  The ones I found were really long so I got another idea from that.  Then you will need one package of twill tape for each towel you make.

I cut a portion off the bottom and will make a pocket from this.  A fabulous idea, if I don't say so myself!

To do this, I flipped the towel over so wrong side is facing up.  I placed my pocket, also wrong side facing up, lining up the raw edges.  I sewed a 1/4" seam on the raw edge.

I took the pocket and flipped it to the front.  This has both the towel and pocket right sides facing out.  I sewed up the sides and along the bottom again.  This just so the pocket is not puffy, but is flat against the towel.

I sewed up the middle of the pocket to bisect it.  I sewed right up the middle blue stripe.

Next, take the twill tape and cut a length that is comfortable length around your neck, about 20-23".  This is the neck strap.  Fold the top left corner in 2" and then back to meet the fold 1".  Place one end of the neck strap in-between one of the folds.  Pin.  Do the same for the right side.  Try the apron on and adjust one side until it is comfortable.

Sew through all layers of the fold and twill tape.  I used a zipper foot to get close to the towel's seams.

Take the remainder of the twill tape and fold in half to determine the middle.  Cut so you have two equal lengths.  Try the apron on again and mark where your natural waist is.  Pin the twill tape end to the two places that were marked on the wrong side of the apron.  Pin it so the tape is coming out of the side of the apron.  Sew in place.

I made the daughter's apron first, where she is tiny, so the apron top is very taken in.

For the neck of the daughter's apron, I left the twill tape as two separate straps so that her Mom can adjust it as she grows.

Here they are...this is a really quick project.  Perfect for a housewarming gift or a gift to a new bride.

Of course, I have to model everything...

Try your hand at a dishtowel apron.  Have fun!

Sari Bracelet

I went online to search for some cute crafts to complete in a short amount of time.  I have been exclusively knitting and I needed a break from it.  First, I checked out Pinterest, then Martha Stewart's Living.  I thought I found something on Martha's website but the directions were terrible, so I just did a good old-fashioned Google search and found something great.

I followed a link to make macrame bracelets!  Macrame is back, Ladies!!

Ok, well, the fad might not have caught on again, but I am willing to give it a go.  This project was found on the blog, Honestly...WTF.  The writer is a very crafty gal and a fashionista whom goes by the name of Erica.  I cannot seem to find her Bio on the blog, but she apparently has 23,000 followers on Twitter.  Go Erica!

My project will use:

 

• A defunct earring ring
• String (like a stiff yarn or hemp)
• Sari ribbon yarn
• Scissors
• Tape
•  Sewing needle

It is essentially a square knotted bracelet with an adjustable knotted slide.  I will show the highlights on my blog, but full instructions are on Honestly...WTF.  She does a great job showing pics of each and every step, that it would be me reinventing the wheel if I were to step-by-step it for you.

First, you are instructed to cut 5 lengths of string.  I cut 3 of the string and 2 of the sari ribbon yarn.  You also need a ring or something to anchor your string to so that you macrame out from the ring.  This will be the centerpiece of the bracelet.  This is where my earrings come into play.

I used the middle-sized ring, but I may have to also use the small one.  My wrist is so tiny, that the middle one is even too big.  But, I started with the middle one and had to follow it through to the end with it.  No problem.

Second, you tie your 2 strings to the ring so they are on opposite sides of each other, tape down one side, and start forming square knots with the sari ribbon yarn over the strings attached to the ring.

This sari ribbon yarn is very decorative and gorgeous, that I thought this would be so pretty as a bracelet.  You are knotting until it is just shy of half distance around your wrist.  Repeat on the other side.

You thread the extra string through the knots and tie it off, but I kept them long so those ribbons will hang once tied.

Third, you are instructed to make the adjustable knot.  You are using scrap string to keep the strands in the shape of a bracelet and you are square knotting again over the strands.  Tie off as in the bracelet square knots.

Fourth, adjust the strands on either side so your hand can just fit through the bracelet.  Tie the loose strands in a knot, separately, on each side near the adjustable knot.

Lastly, try it on and tighten the strings on both sides to center the ring on your wrist.  Trim away the excess strings after the knots.

Ladies, you are all done!  Now go to Erica's blog and make yourself a dozen of these using anything and everything that would work.  This was quick and fun to do.  The creative possibilities are endless and these would make great stocking stuffers for family or your friends.

Let me know if you do make any!  I'll post your pics!

Fade Into Summer Shorts

Happy Memorial Day!

Since this weekend is the official weekend that kicks off summer, what better way than to welcome the wearing of white with a bleaching project.  In Florida, we don't really abide by that whole only-wear-white-after-Memorial-Day rule.  This project is easing into the wearing white gradually, by doing a fade-out on a pair of cut-off shorts.  This idea came from P.S. I Made This. (Such a great site, you have to check it out!)

I took my really dark blue Gap pair of Long and Leans (I love my Long and Leans) and chopped the legs off.  I used a pair of shorts where I liked the length and used those as a guide in cutting the Gap jeans.

Once the shorts were cut, Vince and I made a solution of 2 parts water and 1 part bleach in a bucket.  We propped the shorts up in the bucket so only the bottom portion was dipped in the solution.

We let it sit there for awhile.  The original instructions said for 30 minutes at first but that it could take a few dips.  Well, we had it in the bucket for about 5 hours (it was about midnight at this point) and it was bleaching it, but it was not white as snow yet.  Good enough!

Next we took them out and dumped and rinsed the bucket of bleach solution out.  In the same bucket, we made a solution of 2 parts water and 1 part vinegar.  This will stop the bleaching process.  Completely soak the shorts in this solution for about 10 minutes.

Once soaked and completely stinky, the next step is to wash them in the washing machine.  Wash them alone for this first time only.  Then dry them as usual (alone this first time, too).

Guess what, my crafty peeps?  You are done!

Washing them made them a bit whiter, maybe because I was seeing them wet and these are now dry.

I will wear these shorts proud at a Memorial Day BBQ party tomorrow.  Thank you to all the military that had fallen to allow us to be free!  Rest in Peace.

Source: google.com via Nancy on Pinterest

The 'Do Rag

Yesterday, I attended a company sporting event on St. Pete Beach, FL.  It was called the America II Corporate Sports Fest 2012.  It was a blast!!

Normally, when I workout,  I just wear my hair in a ponytail and bobby pin my bangs up.  That, however, does not control the whispies that I get from the wind and general movement.  I hate the whispies!

For Sports Fest, I knew there would be cameras and people taking pictures, so I wanted to ensure that those whispies don't even get an appearance.  I decided to wear a bandana on my head, in a 'do-rag fashion.

Rockin' the 'Do Rag!!

It worked like a charm!  It stayed in place all day.

Now, you may also want to don the 'do rag when you are at home doing housework, working in the yard or going for a neighborhood jog but may not have a cool bandana at home.

You can easily make one with an old t-shirt and a pair or scissors:

Here is the bandana I used, I folded it so it really is just a triangle:

Half a square, is all you need

I took an old t-shirt that had a cool design on it:

Eh, cool enough.

Then I placed the folded bandana on top of the design and did a rough cut through both layers of the t-shirt, following the edge of the bandana:

Step 1: Lay on top

Step 2: Cut

Well, guess what?  You're done!  It's that simple.  The best thing about this too, is that when you cut through both layers of the t-shirt, you have just made yourself two 'do rags!  A two-fer!  It doesn't get much better than that!

If you do not have a bandana, then just cut a large triangle.  Really, your cut lines don't even have to be that straight or perfect.

To put it on your head: Hold the long side ends so that the middle of the long side is against your forehead, having the design facing outwards.  Flip your head over so that your hair is hanging down and bring the ends that are in your hands to the nape of your neck.  All of your hair should be within the 'do rag at this point.  Then pull tight and make a tight knot at the nape of your neck.  Flip your head back over and pull the 'do rag back to about the start of your hairline.  Untuck your ears.

Ah, no more whispies!

Here is me with my two-fer 'do rags:

Two-fers, come and get your Two-fers!

Now, go out and rock that 'do rag!!

Unbiased Cardi

I've read that you can convert a sweater into a cardigan with some bias tape.  So, on one of my trips to Goodwill, I bought this cute Aeropostale, cabled, lime green sweater, with the intention of converting it.

I figured this would be a cute one because it was a bit snug on me.  I took the scissors, bias tape and chose a pink button to sew to the top to match the pink embroidered butterfly on the front.

I cut up the middle and got my biased tape prepared (ironed it).  I pinned the bias tape to the raw edge of the sweater.

I started sewing the bias tape to the sweater edge.  I only got a few inches in and I already was seeing crooked sewing and even the biased tape was off the sweater.  Not good.  I hate bias tape.  I never liked it.  I had a project once where I was sewing bias tape around the entire perimeter of this baby bathrobe.  Ugh!  I couldn't do it; I had to have my friend Kj finish it.

This project is not coming out any better (and I don't have Kj near me to finish this for me)!  I just cut off a little more of the sweater to cut off the bad bias sew job.

I then decided to chuck the bias tape and just fold over the raw edge and sew.

This came out much better.  Next was the arms.  They were so long and monkey-like.  I figured I would shorten them, similar to what I did for the Silk Tissue Tee a few weeks ago.

I cut a section out from the arms, keeping the wrist cuff portion.  I used the same technique where I reattached the cuff to the arm.  This was about where the elbow was.

It does not lay smooth like it was seamless, but when I have it on, it is at my elbow, so the crook of my elbow bunches it up; you can't tell something is amiss.

Yeah, I took this pic on Saturday morning, please excuse my bed-head.  Anyway, here it is, my unbiased cardi.  It is a cute little thing to just throw on when you're feeling a bit chilled.  I did not use the pink button because this is way snugger than I remembered.  It would not have looked nice with the button.  I can't close this cardi any more than you see in the pic.

That's fine by me...I like it for the arms and a splash of color.  I feel good about rescuing something from Goodwill or a yard sale and putting my own pizazz into it.